Superior Bins Limited Warranties

LIFETIME BIN ROOF WARRANTY

Superior Manufacturing LLC warrants to the original purchaser a lifetime warranty on material replacement for all unstructured roofs on stiffened and unstiffened farm bins, not exceeding 48 feet in diameter and 10 rings in height. The lifetime warranty is for erected unstructured roofs on stiffened and unstiffened farm bins properly installed pursuant to Superior Manufacturing, LLC’s specifications against wind or snow load failure providing no other damage occurred to the bin during a weather-related incident. Superior roofs are designed for 8,000 lb. roof loads, including ground snow loads of 40 lbs./sq. ft. and wind gusts up to 90 mph. Roofs must be properly installed and used according to design criteria or warranty will be voided. Warranty registration must be mailed or emailed within 30 days of project completion in order for warranty to become effective. See www.superiorbins.com for online registration or mail in warranty registration provided with the Operations Manual.

LIFETIME BOTTOM RING WARRANTY

Superior Manufacturing LLC warrants to the original purchaser a lifetime warranty on material replacement for all unstiffened farm bin bottom rings. The lifetime warranty is for erected unstiffened farm bins properly installed pursuant to Superior Manufacturing, LLC’s instructions providing the concrete and anchors are properly placed and the bin is used within the design criteria. Damage sustained due to seismic activity does not apply to this limited warranty. Warranty registration must be mailed or emailed within 30 days of project completion in order for warranty to become effective. See www.superiorbins.com for online registration or mail in warranty registration provided with the Operations Manual.

SUPERIOR LIMITED WARRANTY

Superior Manufacturing LLC warrants to the original purchaser within 5 years from the date of purchase that the grain bin shall be free from defective material and workmanship. All other equipment in conjunction with the grain bin shall carry a one-year warranty. A part that substantially fulfills performance specifications within industry guidelines shall not be considered defective. Parts that Superior considers defective shall be returned freight free to Superior for replacement or repair in Superior’s sole discretion. Warranty registration must be mailed or emailed within 30 days of project completion in order for warranty to become effective. See www.superiorbins.com for online registration or mail in warranty registration provided with the Operations Manual.

Exclusions: Items manufactured by others shall carry the warranty of those respective manufacturers. Improper use, improper storage, installation by others, substitution or modification of parts, neglect, normal wear, labor or freight is specifically excluded under this warranty. Damage from improper use shall include, but is not limited to:

• Vacuum (suction) air moving systems.
• Pressure systems with inadequate exhaust venting.
• Freezing of or trash accumulation on exhaust vent surfaces (open fill cap and inspection hole when operating fans if temperatures are below freezing).
• Filling past the eave or against the roof panels.
• Filling with materials, which are not free flowing.
• Off center filling or unloading.
• Excessive or off center loading equipment attached to the roof.
• White rust after shipment and in customer storage.

Superior makes no foundation recommendations. Consult a local engineer.

SUPERIOR WARRANTY REGISTRATION

COMPLETE AND SEND IN YOUR WARRANTY REGISTRATION CARD, OR COMPLETE ONLINE REGISTRATION.

To accept the warranty, you acknowledge the following:

• I purchased the equipment listed.
• I thoroughly read and understand the installation and operation manual.
• I read and understand the nature and extent of the warranty and understand clearly that there were and are no other representations or warranties, either expressed or implied, made by anyone.
• I read and understand the safety precautions. In the event someone other than myself will operate the equipment, I will properly train them in safe operation of the equipment prior to operation and require that all individuals operating the equipment will read and understand the safety precautions.
• I properly mounted all operation and safety decals and will keep all safety shields in place at all times.

‎ ‎